Produkte

BĂĽrsten-DC-Motor mit hoher Leistungsdichte

24DCT Athlonix - Graphite - BĂĽrsten-DC-Motor mit hoher Leistungsdichte

24DCT Athlonix - Graphite

Durch die Kombination aus hoher Leistungsdichte und Edelmetallkommutation leistet der 24DCT-Mini-DC-Motor ein Dauerdrehmoment von mehr als 10,07 mN·m in einem sehr kompakten Paket.

Motor Highlights

  • Eisenkernloser Aufbau

  • Neodym-Magnet

  • Edelmetallkommutation

  • Langlebiege BĂĽrste

  • Kompakte AusfĂĽhrung

  • Wicklungsmöglichkeiten

  • REE-Wicklungen, um Elektroerosion zu reduzieren

Kundenspezifische Lösungen

  • Wellenlängen
  • Sonderspulen
  • Kabel und Steckverbinder
  • Kugellager
  • Befestigungslöcher

Anwendungen

Technische Daten + Details
Downloads
Metrisch Englisch
Winding{%|%}unit 24DCT 32G2 226P 2 24DCT 32G2 221P 2 24DCT 32G2 216P 2 24DCT 32G2 215P 2 24DCT 32G2 213P 2 24DCT 32G2 212P 2 24DCT 32G2 215E 2 24DCT 32G2 214E 2 24DCT 32G2 213E 2 24DCT 32G2 212E 2 24DCT 32G2 210E 2
Diameter{%|%}in 0.94 0.94 0.94 0.94 0.94 0.94 0.94 0.94 0.94 0.94 0.94
Diameter{%|%}mm 24 24 24 24 24 24 24 24 24 24 24
Nominal Voltage{%|%}V 3.0 6.0 9.0 12.0 15.0 18.0 21.0 24.0 30.0 36.0 48.0
Optimization{%|%}rpm
No-Load Speed{%|%}rpm 5,651 7,324 6,414 7,613 7,342 7,342 6,952 7,048 7,810 7,810 7,602
Type
Resolution{%|%}line counts
Supply Voltage{%|%}V
Supply Current - typical{%|%}mA
Supply Current - maxium{%|%}mA
Supply Current - stand-by{%|%}ÎĽA
Rise time{%|%}ns
Fall time{%|%}ns
No-Load Current{%|%}mA 90.0 58.0 34.0 30.0 23.0 19.0 16.0 14.0 12.0 10.0 8.0
Max continuous mechanical power{%|%}@ 25°C
Max continuous Current{%|%}A
Max Continuous Torque{%|%}mNm
Max Continuous Torque{%|%}oz-in
Terminal Resistance{%|%}Ω 0.6 0.9 2.2 2.7 4.3 6.1 10.1 13.0 16.4 23.6 46.3
Output Power{%|%}W 3.7 7.1 6.9 8.8 8.7 8.8 7.7 7.8 9.0 8.9 8.4
Stall Torque{%|%}oz-in 3.68 6.98 7.72 9.35 9.47 9.60 8.38 8.40 9.39 9.37 8.72
Stall Torque{%|%}mNm 25.95 49.30 54.54 66.00 66.88 67.80 59.20 59.34 66.32 66.15 61.60
Efficiency{%|%}% 76 82 83 84 84 84 83 83 84 84 84
Speeds up to{%|%}rpm 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000
Torque up to{%|%}oz-in 1.43 1.74 1.96 1.98 2.04 2.05 1.97 1.95 1.96 1.96 1.92
Torque up to{%|%}mNm 10.07 12.29 13.87 14.01 14.37 14.47 13.88 13.80 13.86 13.84 13.53
Current up to, thermal limits{%|%}Amp 2.11 1.64 1.07 0.96 0.76 0.64 0.50 0.44 0.39 0.32 0.23
Back-EMF Constant{%|%}V/1000 rpm 0.52 0.81 1.39 1.57 2.03 2.44 3.00 3.38 3.82 4.58 6.27
Torque Constant{%|%}mNm/A 5.0 7.8 13.3 15.0 19.4 23.3 28.6 32.3 36.4 43.7 59.9
Torque Constant{%|%}oz-in/A 0.71 1.10 1.88 2.12 2.74 3.29 4.05 4.57 5.16 6.19 8.48
Motor Regulation R/k²{%|%}10³/Nms
Motor regulation k/R½{%|%}mNm/W
Motor regulation k/R½{%|%}oz-in/W
Internal resistance - phase to phase (W)
Line to Line resistance at connectors (Ω)
Inductance - phase to phase (mH)
Friction Torque{%|%}oz-in 0.064 0.064 0.064 0.064 0.064 0.064 0.064 0.064 0.064 0.064 0.064
Friction Torque{%|%}mNm 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45
Rotor Inductance{%|%}µH
Mechanical Time Constant{%|%}ms 10.8 7.5 5.9 5.7 5.4 5.3 5.9 5.9 5.8 5.8 5.8
Rotor Inertia{%|%}gcm²
Rotor Inertia{%|%}gcm² 4.730 4.800 4.780 4.720 4.740 4.700 4.810 4.720 4.740 4.700 4.470
Thermal Resistance{%|%}C/W 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22
Thermal Time Constant{%|%}C/W 9/550 9/550 9/550 9/550 9/550 9/550 9/550 9/550 9/550 9/550 9/550
Weight{%|%}oz 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54
Weight{%|%}g 72.0 72.0 72.0 72.0 72.0 72.0 72.0 72.0 72.0 72.0 72.0
Absolute accuracy 2 ph. On, Full step mode (degree)
Ambient working temperature range (C)
Ambient working temperature range (F)
Bearing Type
Detent Torque, Max (mNm)
Detent Torque, Max (oz-in)
Dielectric Withstanding Voltage (VAC)
Holding Torque, MIN (mNm)
Holding Torque, MIN (oz-in)
Inductance per Phase, typ (mH)
Insulation Resistance at 500 VDC (Mohms)
Leadwire
Maximum Coil Temperature (C)
Maximum Coil Temperature (F)
Operating Voltage (VDC)
Rated Current per Phase, 1 Phase ON (A)
Resistance per Phase, ± 10% (Ohms)
Rotor Inertia (oz-in-sec²10{%SUP%}-6{%/SUP%})
Electrical time constant (ms)
Max motor speed (rpm)
Ambient storage temperature range (C)
Ambient storage temperature range (F)
Ball bearings preload (N)
Axial static force without shaft support (N)
Max winding temperature (C)
Max Winding Temperature (C)
Max Winding Temperature (F)
Max winding temperature (F)
Hall Sensor Elecrical Phasing (degree)
Typical Housing Material
Continuous Stall Current (A)
Peak Torque for 1s (mNm)
Peak Torque for 1s (oz-in)
Peak Current (A)
Max Axial Shaft Load (N)
Max Axial Shaft Load (oz)
Max Radial Shaft Load (N)
Max Radial Shaft Load (oz)
Shaft Load Max Axial (lb)
Shaft Load Max Axial (N)
Shaft Load Max Radial (lb)
Shaft Load Max Radial (N)
Length (in)
Length (mm)
Steps per Revolution
Back EMF Amplitude (V/ksteps/s)
Nominal Phase Current (1 ph. On) (A)
Nominal Phase Current (2 ph. On) (A)
Angular Acceleration (nominal current)
Axial Shaft Play (µm)
Holding Torque Typical (mNm)
Holding Torque Typical (oz-in)
Holding Torque, 1.5x nominal current (mNm)
Holding Torque, 1.5x nominal current (oz-in)
Natural Resonance Frequency @nominal current (Hz)
Power rate (nominal current) (kW/s)
Radial Shaft Play (µm)
Max. Force* @ .001" (0.0254 mm) / Step (N)
Max. Force* @ .001" (0.0254 mm) / Step (oz)
Max. Force* @ .002" (0.0508 mm) / Step (N)
Max. Force* @ .002" (0.0508 mm) / Step (oz)
Max. Force* @ .004"(0.1016 mm) / Step (N)
Max. Force* @ .004"(0.1016 mm) / Step (oz)
Stroke Length, Typ{%|%}mm
Stroke Length, Typ{%|%}in
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (oz)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (oz)
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}N
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}oz
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (oz)
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}oz
Output signal{%|%}MHz
Direction of rotation ( = / ≠)
Max. Recommended Input Speed (rpm)
Number of gear stages
Electrical phase shift{%|%}degree
Duty cycle{%|%}%
Maximum count frequency{%|%}kHz
Maximum speed @ 512 ppr{%|%}10{%SUP%}-7{%/SUP%} x kgm²
Maximum speed @ 1024 ppr{%|%}10{%SUP%}-7{%/SUP%} x kgm²
Operating Temperature Range: Rotor{%|%}°C 100°C 100°C 100°C 100°C 100°C 100°C 100°C 100°C 100°C 100°C 100°C
Operating Temperature Range: Motor{%|%}°C -30°C to 85°C -30°C to 85°C -30°C to 85°C -30°C to 85°C -30°C to 85°C -30°C to 85°C -30°C to 85°C -30°C to 85°C -30°C to 85°C -30°C to 85°C -30°C to 85°C
Operating Temperature Range: Motor{%|%}°F -22°F to 185°F -22°F to 185°F -22°F to 185°F -22°F to 185°F -22°F to 185°F -22°F to 185°F -22°F to 185°F -22°F to 185°F -22°F to 185°F -22°F to 185°F -22°F to 185°F
Operating Temperature Range: Rotor{%|%}°F 212°F 212°F 212°F 212°F 212°F 212°F 212°F 212°F 212°F 212°F 212°F
Code wheel moment of inertia{%|%}10{%SUP%}-7{%/SUP%} x kgm²
Linear Travel Accuracy
Input Power (W)
Input Power (W)
Stepper Type
Document Technology Document Type Language File Type
24DCT Athlonix Graphite Specification Sheet BĂĽrsten-DC Spezifikationsseite  
24DCT Athlonix G Drawing BĂĽrsten-DC DXF-Zeichnung  
24DCT Athlonix G1 3D Drawing BĂĽrsten-DC 3D  
24DCT Athlonix G2 3D Drawing BĂĽrsten-DC 3D