Produkte

Getriebe

R22 - Getriebe

R22

Unser R22 ist ein Vollplastikgetriebekopf, ausgestattet mit einem Planetengetriebe für Anwendungen, die ein hohes Drehmoment in einer relativ kleinen Baugröße erfordern. Wegen des niedrigen Spiels ist er für Präzisionsbewegungsanforderungen in verschiedenen Anwendungen ideal geeignet. Zusammen mit den Vorteilen des Planetengetriebes und seinem einzigartigen Lagersystem liefert er hohe Kräfte für Anwendungen mit einer höheren radialen Belastbarkeit.

Motor Highlights

  • Weitere Getriebeübersetzungen finden sind auf dem Datenblatt PDF, das sie hierzu öffnen müssen

  • Hochpräzise Leistung zu einem günstigen Preis

  • Untersetzung von 5,75:1 bis 1090:1

  • Nenndrehmoment 0,6 Nm

  • Kompakte Ausführung

  • Anpassung an Anwendungsanforderungen

  • Gleit- und Kugellageroptionen verfügbar

Kundenspezifische Lösungen

      Technische Daten + Details
      Downloads
      Metrisch Englisch
      Ratio{%|%}unit 16.2 19.4 27.6 33.1 111.0 132.0 159.0 190.0 376.0 1 090.0
      Number of gear stages 2 2 2 2 3 3 3 3 4 4
      Direction of rotation{%|%} = / ≠ = = = = = = = = = =
      Efficiency{%|%}% 70 70 70 70 60 60 60 60 50 50
      Length{%|%}mm 32.5 32.5 32.5 32.5 40.0 40.0 40.0 40.0 40.0 40.0
      Length{%|%}in 1.28 1.28 1.28 1.28 1.57 1.57 1.57 1.57 1.57 1.57
      Weight{%|%}g 25.0 25.0 25.0 25.0 30.0 30.0 30.0 30.0 33.0 33.0
      Weight{%|%}oz 0.88 0.88 0.88 0.88 1.06 1.06 1.06 1.06 1.16 1.16
      Nominal Torque{%|%}mNm 600.0 600.0 600.0 600.0 600.0 600.0 600.0 600.0 600.0 600.0
      Nominal Torque{%|%}oz-in 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0 85.0
      Diameter{%|%}mm 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00
      Diameter{%|%}in 0.87 0.87 0.87 0.87 0.87 0.87 0.87 0.87 0.87 0.87
      Operating Voltage (VDC)
      Resistance per Phase, ± 10% (Ohms)
      Inductance per Phase, typ (mH)
      Nominal Phase Current, 2 ph. On (A)
      Nominal Phase Current, 1 ph. On (A)
      Back-EMF Constant (V/1000 rpm)
      Back EMF Amplitude (V/ksteps/s)
      Holding Torque, MIN (mNm)
      Holding Torque, MIN (oz-in)
      Holding Torque Typical (mNm)
      Holding Torque Typical (oz-in)
      Holding Torque, 1.5x nominal current (mNm)
      Holding Torque, 1.5x nominal current (oz-in)
      Detent Torque, Typical (mNm)
      Detent Torque, Typical (oz-in)
      Rated Current per Phase (A)
      Detent Torque, Max (mNm)
      Detent Torque, Max (oz-in)
      Rotor Inertia (kgm²10^-7)
      Rotor Inertia (oz-in-sec²10^-6)
      Nominal Voltage (Volt)
      Optimization (rpm)
      No-Load Speed (rpm)
      No-Load Current (mA)
      Max continuous mechanical power (@ 25°C)
      Max continuous Current (A)
      Max Continuous Torque (mNm)
      Max Continuous Torque (oz-in)
      Terminal Resistance (W)
      Output Power (W)
      Stall Torque (oz-in)
      Stall Torque (mNm)
      Speeds up to (rpm)
      Torque up to (oz-in)
      Torque up to (mNm)
      Current up to (thermal limits)
      Torque Constant (mNm/A)
      Torque Constant (oz-in/A)
      Motor Regulation R/k² (10³/Nms)
      Motor regulation k/R½ (mNm/W)
      Motor regulation k/R½ (oz-in/W)
      Internal resistance - phase to phase (W)
      Line to Line resistance at connectors (Ω)
      Inductance - phase to phase (mH)
      Friction Torque (onz-in)
      Friction Torque (mNm)
      Rotor Inductance (mH)
      Mechanical Time Constant (ms)
      Thermal Time Constant (C/W)
      Absolute accuracy 2 ph. On, Full step mode (degree)
      Operating Temperature Range{%|%}C -30 to 65 -30 to 65 -30 to 65 -30 to 65 -30 to 65 -30 to 65 -30 to 65 -30 to 65 -30 to 65 -30 to 65
      Operating Temperature Range{%|%}F -22 to 150 -22 to 150 -22 to 150 -22 to 150 -22 to 150 -22 to 150 -22 to 150 -22 to 150 -22 to 150 -22 to 150
      Rotor Operating Temperature Range (C)
      Rotor Operating Temperature Range (F)
      Max motor speed (rpm)
      Ambient storage temperature range (C)
      Ambient storage temperature range (F)
      Ball bearings preload (N)
      Axial static force without shaft support (N)
      Max winding temperature (C)
      Max Winding Temperature (C)
      Max Winding Temperature (F)
      Max winding temperature (F)
      Hall Sensor Elecrical Phasing (degree)
      Typical Housing Material
      Continuous Stall Current (A)
      Peak Torque for 1s (mNm)
      Peak Torque for 1s (oz-in)
      Peak Current (A)
      Shaft Load Max Axial (lb)
      Shaft Load Max Axial (N)
      Shaft Load Max Radial (lb)
      Shaft Load Max Radial (N)
      Max. Holding Force* @ .001", 0.0254 mm (N)
      Max. Holding Force* @ .001", 0.0254 mm (oz)
      Max. Holding Force* @ .002", 0.0508 mm (N)
      Max. Holding Force* @ .002", 0.0508 mm (oz)
      Max. Holding Force* @ .004", 0.1016 mm (N)
      Max. Holding Force* @ .004", 0.1016 mm (oz)
      Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}N
      Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}oz
      Min. Holding Force @ 0.001", 0.0254 mm (N)
      Min. Holding Force @ 0.001", 0.0254 mm (oz)
      Min. Holding Force @ 0.002", 0.0508 mm (N)
      Min. Holding Force @ 0.002", 0.0508 mm (oz)
      Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}N
      Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}oz
      Min. Holding Force @ 0.004", 0.1016 mm (N)
      Min. Holding Force @ 0.004", 0.1016 mm (oz)
      Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}N
      Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}oz
      Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}N
      Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}oz
      Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}N
      Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}oz
      Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}N
      Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}oz
      Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}N
      Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}oz
      Stroke Length, Typ{%|%}mm
      Stroke Length, Typ{%|%}in
      Steps per Revolution
      Operating Temperature Range (C)
      Operating Temperature Range (F)
      Maximum Coil Temperature (F)
      Maximum Coil Temperature (C)
      Bearing Type
      Insulation Resistance at 500 VDC (Mohms)
      Dielectric Withstanding Voltage (VAC)
      Number of lines available
      Output signal
      Supply Current - maxium (mA)
      Supply Current - stand-by (μA)
      Supply Current - typical (mA)
      Supply Voltage (V)
      Max. Recommended Input Speed{%|%}rpm 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000
      Number of lines available
      Thermal Resistance (C/W)
      Natural Resonance Frequency @nominal current (Hz)
      Electrical time constant (ms)
      Angular Acceleration (nominal current)
      Radial Shaft Play (µm)
      Axial Shaft Play (µm)
      Max Radial Shaft Load (oz)
      Max Radial Shaft Load (N)
      Max Axial Shaft Load (oz)
      Max Axial Shaft Load (N)
      Leadwire
      Type of encoder
      Power rate, nominal current (kW/s)
      Linear Travel Accuracy
      Input Power (W)
      Stepper Type
      Document Technology Document Type Language File Type
      R22 Specification Sheet Getriebe Spezifikationsseite  
      R22 drawing Getriebe DXF-Zeichnung  
      r22_10_0_111 3D drawing Getriebe 3D  
      r22_10_0_19_4 3D drawing Getriebe 3D  
      r22_10_0_190 3D drawing Getriebe 3D  
      r22_10_0_33 3D drawing Getriebe 3D  
      r22_10_0_641 3D drawing Getriebe 3D