Produkte

Getriebe

R22HT

Portescap stellt das neue 22-mm-Planetengetriebe mit verbesserten Drehmoment vor. Das R22HT ist vollständig aus Metall gefertigt und mit spezialbeschichteten Zahnrädern ausgestattet. Es liefert einDauerdrehmoment von bis zu 3,7 Nm und einen Wirkungsgrad zwischen 62 und 82 % bei einer maximalen empfohlenen Eingangsdrehzahl von 12.000 U/min.

Motor Highlights

  • Getriebe mit hohem Wirkungsgrad

  • Geringeres Gewicht und reduzierte Gesamtgröße

  • Modulbauweise

  • Ideal für batteriebetriebene Werkzeuge

Kundenspezifische Lösungen

  • Wellenlängen
  • Kugellager
  • Befestigungslöcher
  • Montageflansche
  • Spezielle Schmiermittel

Anwendungen

Technische Daten + Details
Downloads
Metrisch Englisch
Winding{%|%}unit R22HT 10.9:1 R22HT 14.5:1 R22HT 16.4:1 R22HT 29.2:1 R22HT 36.5:1 R22HT 61.7:1 R22HT 84.3:1 R22HT 157.5:1 R22HT 410.1:1 R22HT 850.3:1
Diameter{%|%}in 0.86 0.86 0.86 0.86 0.86 0.86 0.86 0.86 0.86 0.86
Diameter{%|%}mm 22 22 22 22 22 22 22 22 22 22
Nominal Voltage{%|%}V
Optimization (rpm)
No-Load Speed{%|%}rpm
Type
Resolution{%|%}line counts
Supply Voltage{%|%}V
Supply Current - typical{%|%}mA
Supply Current - maxium{%|%}mA
Supply Current - stand-by{%|%}μA
Rise time{%|%}ns
Fall time{%|%}ns
No-Load Current{%|%}mA
Max continuous mechanical power (@ 25°C)
Max continuous Current (A)
Max Continuous Torque (mNm)
Max Continuous Torque (oz-in)
Terminal Resistance{%|%}Ω
Output Power{%|%}W
Stall Torque{%|%}oz-in
Stall Torque{%|%}mNm
Efficiency{%|%}% 82 82 82 82 72 72 72 72 62 62
Speeds up to{%|%}rpm
Torque up to{%|%}oz-in
Torque up to{%|%}mNm
Current up to, thermal limits{%|%}Amp
Back-EMF Constant{%|%}V/1000 rpm
Torque Constant{%|%}mNm/A
Torque Constant{%|%}oz-in/A
Motor Regulation R/k² (10³/Nms)
Motor regulation k/R½ (mNm/W)
Motor regulation k/R½ (oz-in/W)
Internal resistance - phase to phase (W)
Line to Line resistance at connectors (Ω)
Inductance - phase to phase (mH)
Friction Torque{%|%}oz-in
Friction Torque{%|%}mNm
Rotor Inductance{%|%}µH
Mechanical Time Constant{%|%}ms
Rotor Inertia{%|%}gcm²
Rotor Inertia{%|%}gcm²
Thermal Resistance{%|%}C/W
Thermal Time Constant{%|%}C/W
Weight{%|%}oz 1.83 1.83 1.83 1.83 2.33 2.33 2.33 2.33 2.86 2.86
Weight{%|%}g 52.0 52.0 52.0 52.0 66.0 66.0 66.0 66.0 81.0 81.0
Absolute accuracy 2 ph. On, Full step mode (degree)
Ambient working temperature range (C)
Ambient working temperature range (F)
Bearing Type
Detent Torque, Max (mNm)
Detent Torque, Max (oz-in)
Dielectric Withstanding Voltage (VAC)
Holding Torque, MIN (mNm)
Holding Torque, MIN (oz-in)
Inductance per Phase, typ (mH)
Insulation Resistance at 500 VDC (Mohms)
Leadwire
Maximum Coil Temperature (C)
Maximum Coil Temperature (F)
Operating Voltage (VDC)
Rated Current per Phase, 1 Phase ON (A)
Resistance per Phase, ± 10% (Ohms)
Rotor Inertia (oz-in-sec²10{%SUP%}-6{%/SUP%})
Electrical time constant (ms)
Max motor speed (rpm)
Ambient storage temperature range (C)
Ambient storage temperature range (F)
Ball bearings preload (N)
Axial static force without shaft support (N)
Max winding temperature (C)
Max Winding Temperature (C)
Max Winding Temperature (F)
Max winding temperature (F)
Hall Sensor Elecrical Phasing (degree)
Typical Housing Material
Continuous Stall Current (A)
Peak Torque for 1s (mNm)
Peak Torque for 1s (oz-in)
Peak Current (A)
Max Axial Shaft Load (N)
Max Axial Shaft Load (oz)
Max Radial Shaft Load (N)
Max Radial Shaft Load (oz)
Shaft Load Max Axial (lb)
Shaft Load Max Axial (N)
Shaft Load Max Radial (lb)
Shaft Load Max Radial (N)
Length (in) 1.11 1.11 1.11 1.11 1.38 1.38 1.38 1.38 1.65 1.65
Length (mm) 28.30 28.30 28.30 28.30 35.10 35.10 35.10 35.10 41.90 41.90
Steps per Revolution
Back EMF Amplitude (V/ksteps/s)
Nominal Phase Current (1 ph. On) (A)
Nominal Phase Current (2 ph. On) (A)
Angular Acceleration (nominal current)
Axial Shaft Play (µm)
Holding Torque Typical (mNm)
Holding Torque Typical (oz-in)
Holding Torque, 1.5x nominal current (mNm)
Holding Torque, 1.5x nominal current (oz-in)
Natural Resonance Frequency @nominal current (Hz)
Power rate (nominal current) (kW/s)
Radial Shaft Play (µm)
Max. Force* @ .001" (0.0254 mm) / Step (N)
Max. Force* @ .001" (0.0254 mm) / Step (oz)
Max. Force* @ .002" (0.0508 mm) / Step (N)
Max. Force* @ .002" (0.0508 mm) / Step (oz)
Max. Force* @ .004"(0.1016 mm) / Step (N)
Max. Force* @ .004"(0.1016 mm) / Step (oz)
Stroke Length, Typ{%|%}mm
Stroke Length, Typ{%|%}in
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (oz)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (oz)
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}N
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}oz
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (oz)
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}oz
Output signal{%|%}MHz
Direction of rotation ( = / ≠) = = = = = = = = = =
Max. Recommended Input Speed (rpm) 12 000 12 000 12 000 12 000 12 000 12 000 12 000 12 000 12 000 12 000
Number of gear stages 2 2 2 2 3 3 3 3 4 4
Electrical phase shift{%|%}degree
Duty cycle{%|%}%
Maximum count frequency{%|%}kHz
Maximum speed @ 512 ppr{%|%}10{%SUP%}-7{%/SUP%} x kgm²
Maximum speed @ 1024 ppr{%|%}10{%SUP%}-7{%/SUP%} x kgm²
Operating Temperature Range: Rotor{%|%}°C
Operating Temperature Range: Motor{%|%}°C -30 to + 85 -30 to +85 -30 to +85 -30 to +85 -30 to +85 -30 to +85 -30 to +85 -30 to +85 -30 to +85 -30 to +85
Operating Temperature Range: Motor{%|%}°F -22 to +185 -22 to +185 -22 to +185 -22 to +185 -22 to +185 -22 to +185 -22 to +185 -22 to +185 -22 to +185 -22 to +185
Operating Temperature Range: Rotor{%|%}°F
Code wheel moment of inertia{%|%}10{%SUP%}-7{%/SUP%} x kgm²
Linear Travel Accuracy
Input Power (W)
Input Power (W)
Stepper Type
Ratio{%|%}unit 10.9 14.5 16.4 29.2 36.5 61.7 84.3 157.5 410.1 850.3
Number of gear stages 2 2 2 2 3 3 3 3 4 4
Direction of rotation{%|%} = / ≠ = = = = = = = = = =
Efficiency{%|%}% 82 82 82 82 72 72 72 72 62 62
Length{%|%}mm 28.3 28.3 28.3 28.3 35.1 35.1 35.1 35.1 41.9 41.9
Length{%|%}in 1.11 1.11 1.11 1.11 1.38 1.38 1.38 1.38 1.65 1.65
Weight{%|%}g 52.0 52.0 52.0 52.0 66.0 66.0 66.0 66.0 81.0 81.0
Weight{%|%}oz 1.83 1.83 1.83 1.83 2.33 2.33 2.33 2.33 2.86 2.86
Nominal Torque{%|%}mNm 2,400.0 2,400.0 2,400.0 2,400.0 3,300.0 3,300.0 3,300.0 3,300.0 3,700.0 3,700.0
Nominal Torque{%|%}oz-in 0.3 0.3 0.3 0.3 0.5 0.5 0.5 0.5 0.5 0.5
Diameter{%|%}mm 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00 22.00
Diameter{%|%}in 0.86 0.86 0.86 0.86 0.86 0.86 0.86 0.86 0.86 0.86
Operating Voltage (VDC)
Resistance per Phase, ± 10% (Ohms)
Inductance per Phase, typ (mH)
Nominal Phase Current, 2 ph. On (A)
Nominal Phase Current, 1 ph. On (A)
Back-EMF Constant (V/1000 rpm)
Back EMF Amplitude (V/ksteps/s)
Holding Torque, MIN (mNm)
Holding Torque, MIN (oz-in)
Holding Torque Typical (mNm)
Holding Torque Typical (oz-in)
Holding Torque, 1.5x nominal current (mNm)
Holding Torque, 1.5x nominal current (oz-in)
Detent Torque, Typical (mNm)
Detent Torque, Typical (oz-in)
Rated Current per Phase (A)
Detent Torque, Max (mNm)
Detent Torque, Max (oz-in)
Rotor Inertia (kgm²10^-7)
Rotor Inertia (oz-in-sec²10^-6)
Nominal Voltage (Volt)
Optimization (rpm)
No-Load Speed (rpm)
No-Load Current (mA)
Max continuous mechanical power (@ 25°C)
Max continuous Current (A)
Max Continuous Torque (mNm)
Max Continuous Torque (oz-in)
Terminal Resistance (W)
Output Power (W)
Stall Torque (oz-in)
Stall Torque (mNm)
Speeds up to (rpm)
Torque up to (oz-in)
Torque up to (mNm)
Current up to (thermal limits)
Torque Constant (mNm/A)
Torque Constant (oz-in/A)
Motor Regulation R/k² (10³/Nms)
Motor regulation k/R½ (mNm/W)
Motor regulation k/R½ (oz-in/W)
Internal resistance - phase to phase (W)
Line to Line resistance at connectors (Ω)
Inductance - phase to phase (mH)
Friction Torque (onz-in)
Friction Torque (mNm)
Rotor Inductance (mH)
Mechanical Time Constant (ms)
Thermal Time Constant (C/W)
Absolute accuracy 2 ph. On, Full step mode (degree)
Operating Temperature Range{%|%}C -30 to + 85 -30 to +85 -30 to +85 -30 to +85 -30 to +85 -30 to +85 -30 to +85 -30 to +85 -30 to +85 -30 to +85
Operating Temperature Range{%|%}F -22 to +185 -22 to +185 -22 to +185 -22 to +185 -22 to +185 -22 to +185 -22 to +185 -22 to +185 -22 to +185 -22 to +185
Rotor Operating Temperature Range (C)
Rotor Operating Temperature Range (F)
Max motor speed (rpm)
Ambient storage temperature range (C)
Ambient storage temperature range (F)
Ball bearings preload (N)
Axial static force without shaft support (N)
Max winding temperature (C)
Max Winding Temperature (C)
Max Winding Temperature (F)
Max winding temperature (F)
Hall Sensor Elecrical Phasing (degree)
Typical Housing Material
Continuous Stall Current (A)
Peak Torque for 1s (mNm)
Peak Torque for 1s (oz-in)
Peak Current (A)
Shaft Load Max Axial (lb)
Shaft Load Max Axial (N)
Shaft Load Max Radial (lb)
Shaft Load Max Radial (N)
Max. Holding Force* @ .001", 0.0254 mm (N)
Max. Holding Force* @ .001", 0.0254 mm (oz)
Max. Holding Force* @ .002", 0.0508 mm (N)
Max. Holding Force* @ .002", 0.0508 mm (oz)
Max. Holding Force* @ .004", 0.1016 mm (N)
Max. Holding Force* @ .004", 0.1016 mm (oz)
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ 0.001", 0.0254 mm (N)
Min. Holding Force @ 0.001", 0.0254 mm (oz)
Min. Holding Force @ 0.002", 0.0508 mm (N)
Min. Holding Force @ 0.002", 0.0508 mm (oz)
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}N
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}oz
Min. Holding Force @ 0.004", 0.1016 mm (N)
Min. Holding Force @ 0.004", 0.1016 mm (oz)
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}oz
Stroke Length, Typ{%|%}mm
Stroke Length, Typ{%|%}in
Steps per Revolution
Operating Temperature Range (C)
Operating Temperature Range (F)
Maximum Coil Temperature (F)
Maximum Coil Temperature (C)
Bearing Type
Insulation Resistance at 500 VDC (Mohms)
Dielectric Withstanding Voltage (VAC)
Number of lines available
Output signal
Supply Current - maxium (mA)
Supply Current - stand-by (μA)
Supply Current - typical (mA)
Supply Voltage (V)
Max. Recommended Input Speed{%|%}rpm 12,000 12,000 12,000 12,000 12,000 12,000 12,000 12,000 12,000 12,000
Number of lines available
Thermal Resistance (C/W)
Natural Resonance Frequency @nominal current (Hz)
Electrical time constant (ms)
Angular Acceleration (nominal current)
Radial Shaft Play (µm)
Axial Shaft Play (µm)
Max Radial Shaft Load (oz)
Max Radial Shaft Load (N)
Max Axial Shaft Load (oz)
Max Axial Shaft Load (N)
Leadwire
Type of encoder
Power rate, nominal current (kW/s)
Linear Travel Accuracy
Input Power (W)
Stepper Type
Document Technology Document Type Language File Type
R22HT Specification Sheet Getriebe Spezifikationsseite  
R22HT 3D drawing Getriebe 3D  
R22HT drawing Getriebe DXF-Zeichnung  
R22HT Brochure (German) Getriebe Literatur  
R22HT Pressemitteilung Getriebe Press Release