Produkte

Bürsten- und nutenloser DC-Motor der Ultra-EC-Baureihe

22ECP35 Ultra EC - Bürsten- und nutenloser DC-Motor der Ultra-EC-Baureihe

22ECP35 Ultra EC

Die Miniaturmotoren der ECP-Reihe sind ultrakostenoptimiert, ohne dabei an der Spitzenleistung einzubüßen. Der 2-polige, bürstenlose Motor der Serie 22ECP35 bietet hohe Dauer- und Spitzendrehmomente sowie 100 Prozent mehr Leistungsstärke im Gegensatz zu vergleichbaren Motoren und garantiert dabei eine reibungslose Funktionsweise und lange Lebensdauer. Mit dem 22ECP35 erzielen Sie das richtige Verhältnis zwischen Drehzahl und Drehmoment in einer kompakten, kurzen Länge. Noch stärker ist die Anpassungsfähigkeit des 22ECP35 für die meisten Anwendungen auf den Medizin- und Industriemärkten bei gleichzeitiger Erhöhung von Lebensdauer und Zuverlässigkeit.

Motor Highlights

  • 2-poliger, nutenloser Motor

  • Mit oder ohne Hall-Sensoren

  • 2 Standardlängen erhältlich

  • Richtiges Verhältnis von Drehzahl und Drehmoment

  • Eigenes Hochleistungs-Spulendesign

  • Optimiertes Preis-Leistungs-Verhältnis

Kundenspezifische Lösungen

  • Steckverbinder
  • Verschiedene Spulenimpedanzen
  • Wellenlängen
  • Highspeed-Version (ECS) mit Dämpfungssystem

Anwendungen

Hide Reduce Design Time block (check box for SMS products only) 
Technische Daten + Details
Downloads
Metrisch Englisch
Winding{%|%}unit 22ECP35 8B 184
Diameter{%|%}in 0.87
Diameter{%|%}mm 22
Length{%|%}in 1.38
Length{%|%}mm 35.00
Nominal Voltage{%|%}Volt 24.0
Optimization Speed 0
No-Load Speed{%|%}rpm 13,200
Typical No-Load Current{%|%}mA 30
Max continuous mechanical power (@ 25°C){%|%}W 55.0
Max continuous Current{%|%}A 0.8
Max Continuous Torque{%|%}mNm 14.30
Max Continuous Torque{%|%}oz-in 2.02
Terminal Resistance{%|%}Ω
Output Power{%|%}W
Stall Torque{%|%}oz-in
Stall Torque{%|%}mNm
Efficiency{%|%}%
Speeds up to{%|%}rpm
Torque up to{%|%}oz-in
Torque up to{%|%}mNm
Current up to{%|%}thermal limits
Back-EMF Constant{%|%}V/1000 rpm 1.82
Torque Constant{%|%}mNm/A 17.40
Torque Constant{%|%}oz-in/A 2.46
Motor Regulation R/k²{%|%}10³/Nms
Motor Constant k/R½{%|%}mNm/W½ 6.8
Motor constant k/R½{%|%}oz-in/W½ 0.96
Internal resistance - phase to phase{%|%}Ω 6.58
Line to Line resistance at connectors{%|%}Ω 6.71
Inductance - phase to phase{%|%}mH 0.89
Friction Torque{%|%}onz-in
Friction Torque{%|%}mNm
Rotor Inductance (mH)
Mechanical Time Constant{%|%}ms 3.0
Electrical time constant{%|%}ms 0.14
Max motor speed{%|%}rpm 50,000
Ambient working temperature range{%|%}°C -30 to + 100
Ambient working temperature range{%|%}°F -22 to + 212
Ambient storage temperature range{%|%}°C -40 to + 100
Ambient storage temperature range{%|%}°F -40 to + 212
Ball bearings preload{%|%}N 5.5
Axial static force without shaft support{%|%}N 34
Max Winding Temperature{%|%}°C
Max winding temperature{%|%}°C 125
Max Winding Temperature{%|%}°F
Max winding temperature{%|%}°F 257
Thermal Resistance{%|%}°C/W 3.5 / 12.5
Thermal Time Constant{%|%}s 550
Operating Temperature Range{%|%}°F
Weight{%|%}oz 2.26
Weight{%|%}g 64
Rotor Inertia{%|%}gcm²
Rotor Inertia{%|%}gcm² 1.4
Typical Housing Material Stainless steel aluminum flanges
Hall Sensor Elecrical Phasing{%|%}electrical ° 120
Absolute accuracy 2 ph. On, Full step mode (degree)
Bearing Type
Detent Torque, Max (mNm)
Detent Torque, Max (oz-in)
Dielectric Withstanding Voltage (VAC)
Holding Torque, MIN (mNm)
Holding Torque, MIN (oz-in)
Inductance per Phase, typ (mH)
Insulation Resistance at 500 VDC (Mohms)
Leadwire
Maximum Coil Temperature (C)
Maximum Coil Temperature (F)
Operating Voltage (VDC)
Rated Current per Phase, 1 Phase ON (A)
Resistance per Phase, ± 10%{%|%}Ohms
Rotor Inertia{%|%}oz-in-sec²10^-6
Continuous Stall Current{%|%}A
Peak Torque for 1s{%|%}mNm
Peak Torque for 1s{%|%}oz-in
Peak Current{%|%}A
Max Axial Shaft Load (N)
Max Axial Shaft Load (oz)
Max Radial Shaft Load (N)
Max Radial Shaft Load (oz)
Shaft Load Max Axial{%|%}lb
Shaft Load Max Axial{%|%}N
Shaft Load Max Radial{%|%}lb
Shaft Load Max Radial{%|%}N
Steps per Revolution
Back EMF Amplitude (V/ksteps/s)
Nominal Phase Current (1 ph. On) (A)
Nominal Phase Current (2 ph. On) (A)
Angular Acceleration (nominal current)
Axial Shaft Play (µm)
Holding Torque Typical (mNm)
Holding Torque Typical (oz-in)
Holding Torque, 1.5x nominal current (mNm)
Holding Torque, 1.5x nominal current (oz-in)
Natural Resonance Frequency @nominal current (Hz)
Power rate (nominal current) (kW/s)
Radial Shaft Play (µm)
Max. Force* @ .001" (0.0254 mm) / Step (N)
Max. Force* @ .001" (0.0254 mm) / Step (oz)
Max. Force* @ .002" (0.0508 mm) / Step (N)
Max. Force* @ .002" (0.0508 mm) / Step (oz)
Max. Force* @ .004"(0.1016 mm) / Step (N)
Max. Force* @ .004"(0.1016 mm) / Step (oz)
Stroke Length, Typ{%|%}mm
Stroke Length, Typ{%|%}in
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (oz)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (oz)
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}N
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}oz
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (oz)
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%)oz
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}oz
Number of lines available
Output signal
Supply Current - maxium (mA)
Supply Current - stand-by (μA)
Supply Current - typical (mA)
Supply Voltage (V)
Direction of rotation ( = / ≠)
Max. Recommended Input Speed (rpm)
Number of gear stages
Number of lines available
Type of encoder
Linear Travel Accuracy
Input Power (W)
Stepper Type
Document Technology Document Type Language File Type
22ECP35 Specification Sheet Bürstenlosen DC Spezifikationsseite  
22ECP35 drawing Bürstenlosen DC DXF-Zeichnung  
22ECP35 3D drawing Bürstenlosen DC 3D